Frequently Asked Questions


My car is not listed in the bracket size table. How do I know what size to order?

If your car is not listed in the bracket size table, you can measure your bumper.

Can I install the bracket myself?

Thousands of non-technical people have successfully installed our license plate bracket! Check out the Installation page for a video and detailed, step-by-step instructions. Having trouble? We’re here for you: send your installation questions to bracket-support@skenedesign.com. Wondering if you can do it yourself? Here's our advice: if you own a drill, you can install your bracket without a problem. If you don’t own a drill or you’ve never used one, we recommend asking a handy friend for help, or going to your mechanic or body shop. Any car repair shop can do it — it takes about 10 minutes.

I have a fix-it ticket. Do you ship overnight?

We offer expedited shipping, via USPS Priority. Place your order by 9am, Monday - Friday, and for most addresses your bracket will be delivered within 2 business days. Unfortunately, we don’t have a storefront and cannot accommodate local pickups.

Can I use a license plate frame?

Yes, you can mount a frame over the license plate. If the frame is more than 1/8″ thick, you will need to use longer license plate mounting screws. We provide 10-32 x 3/8″ stainless steel socket screws. Any corrosion resistant 10-32 screw will work, as long as it does not protrude out from the back of the bracket.

Can I run my car through an automatic car wash with this bracket?

Yes! The bracket is securely attached to the bumper using a combination of extra-sticky double-sided tape and a thread-forming screw. The bracket remains securely attached through car washes, rain, snow, and aggressive driving.

Can I temporarily remove the bracket when I put my car in a car show?

Yes, you can easily remove the bracket, with the license plate attached, by removing 2 screws. It takes only a few seconds. The two horizontal sections that remain attached to the underside of the bumper are almost invisible.

I bought the wrong size. How do I exchange my bracket?

If the bracket you ordered is the wrong size, see Find your size to determine the size you need. Send an email to bracket-support@skenedesign.com and tell us the new size. We will send you the new bracket and a prepaid mailing label so you can return the original bracket — all free of charge.

How do I return a bracket?

You can return a bracket for a full refund within 30 days of receiving the bracket. We always ship with tracking, so you’ll know when your bracket was delivered. Send an email to bracket-returns@skenedesign.com — we’ll provide a return authorization number and the address where you can send the bracket. We’ll issue your refund when we receive the bracket.